40T Small Hydraulic Brake Press NC

TECHNICAL FEATURES

  • The Small NC Hydraulic Brake Press machine is C-Frame type . High quality plate welded structure; with vibration stress released will make machine high rigidity and long working life.
  • NC controller can be with AC inverter motors or servo motors to control back gauge and bending depth / bending angle;
  • Small NC Hydraulic Brake Press Back gauge is with Ball screw and liner guide; positioning and repeat accuracy is higher;
  • The Small NC Hydraulic Brake Press machine’s ram is down stroke type; two cylinders transfer bending force;
  • The bending beam / ram is with High wear-resistant polymer guide. It will make ram move smooth and accurate bending;
  • Two side cylinders are hydraulic-mechanic synchronized. Solid torsion bar will make bending under good parallelism and bending accurate;
  • Hydraulic cylinder has built-in mechanic stop. Two cylinders mechanic stops are synchronized by synchro-shaft and gear system. It will make cylinders work at same bending depth;
  • Our engineer designed Small NC Hydraulic Brake Press open height, throat depth and cylinder stroke according to general sheet metal fabrication. Which is our standard machine parameters listed. We also can make according to customer special requirements;
  • At side of Small NC Hydraulic Brake Press, remote hydraulic pressure gauge and adjust handle will make machine bending pressure adjust more easy.
  • Electric and hydraulic systems are with internal overload protection;
  • At side of machine, stroke adjustment structure will control ram top stop position, approaching to working speed change point. Ram working will have fast down, working, holding and return.
  • Hydraulic system is with low noise accurate gear pump, compact hydraulic valve block. Which will make machine easy hydraulic maintenance.
  • Movable foot switch with protection and emergency stop;NC press brake machine wc67k-40t
  • Welded back gauge beam has high rigidity and accuracy; we also can supply nice looking aluminum back gauge; two adjustable stop fingers;
  • Standard Small NC Hydraulic Brake Press is with two front support arms; The arms are mounted in T-slot of working table, vertical-horizontal adjustable. The arms are with ruler and stopper for simple bending option;
  • Standard hydraulic punch and multi-V bottom die is equipped;
  • Small NC Hydraulic Brake Press machine Oil tank is with level and temperature indicator.

PARAMETERS

Item WC67K-40Ton×2000mm
Nominal force(KN) 400
Worktable length(mm) 2000
Distance between holes(mm) 1650
Depth of throat(mm) 200
Ram Stroke (mm) 100
Max open height(mm) 340
Ram Speed (mm/s) Fast Down 65
Working 8
Return 70
Volume of Oil Tank (L) 145L
Main power(Kw) 4
Weight(KGs) 2,800
Overall dimension(L×W×H mm) 2350×1500×2150