NC Hydraulic Plate Bender 200T

200t NC hydraulic press brake machine

We have various bending length for Hydraulic Plate Bender 200T, 3.2m to 6m long. Short hydraulic press brake can work with about 8-10mm mild steel plate, while 6m machine can work with 4mm plate. High strength, Stainless steel plate will need higher bending force. Normally we caculated with yield strength 450Mpa steel plate. for other material, we shall select higher capacity. Normally we use 1.5 times of the caculated mild steel bending force. You can check followed bending force caculation formula to check. We shall reduce hydraulic system pressure if work with thin plate to make machine under lower load.

ASK PRICE

TECHNICAL FEATURES

  • The NC Hydraulic Plate Bender  machine is C-Frame type Press Brake. High quality plate welded structure; with vibration stress released will make machine high rigidity and long working life.
  • NC controller can be with AC inverter motors or servo motors to control back gauge and bending depth / bending angle;
  • Back gauge of NC Hydraulic Plate Bender  is with Ball screw and liner guide; positioning and repeat accuracy is higher;
  • The ram is down stroke type; two cylinders transfer bending force;
  • The bending beam / ram is with High wear-resistant polymer guide. It will make ram move smooth and accurate bending;
  • Two side cylinders are hydraulic-mechanic synchronized. Solid torsion bar will make bending under good parallelism and bending accurate;
  • Hydraulic cylinder has built-in mechanic stop. Two cylinders mechanic stops are synchronized by synchro-shaft and gear system. It will make cylinders work at same bending depth;
  • Our engineer designed machine open height, throat depth and cylinder stroke according to general sheet metal fabrication. Which is our standard machine parameters listed. We also can make according to customer special requirements;
  • At side of CNC Hydraulic Press brake machine, remote hydraulic pressure gauge and adjust handle will make machine bending pressure adjust more easy.
  • Electric and hydraulic systems are with internal overload protection;
  • At side of machine, stroke adjustment structure will control ram top stop position, approaching to working speed change point. Ram working will have fast down, working, holding and return.
  • Hydraulic system is with low noise accurate gear pump, compact hydraulic valve block. Which will make machine easy hydraulic maintenance.NC hydraulic press brake bending machine 200t
  • Movable foot switch with protection and emergency stop;
  • Welded back gauge beam has high rigidity and accuracy; we also can supply nice looking aluminum back gauge; two adjustable stop fingers;
  • Standard machine is with two front support arms; The arms are mounted in T-slot of working table, vertical-horizontal adjustable. The arms are with ruler and stopper for simple bending option;
  • Standard hydraulic punch and multi-V bottom die is equipped;
  • NC Hydraulic Plate Bender Oil tank is with level and temperature indicator.
Item WC67K-200Ton×3200mm WC67K-200Ton×4000mm
Nominal force(KN) 2000 2000
Worktable length(mm) 3200 4000
Distance between holes(mm) 2650 3100
Depth of throat(mm) 320 320
Ram Stroke (mm) 200 200
Max open height(mm) 480 480
Ram Speed (mm/s) Fast Down 70 70
Working 7 7
Return 60 60
Volume of Oil Tank (L) 360L 470L
Main power(Kw) 15 15
Weight(KGs) 10,700 11,600
Overall dimension(L×W×H mm) 3550×2150×2800 4400×2150×2900