NC Hydraulic Press Brake Machine 100T

TECHNICAL FEATURES

  • The machine is C-Frame type NC  Hydraulic Press Brake, with high quality plate welded structure and with vibration stress released. It will obviously make machine high rigidity and long working life.
  • NC controller of  NC Hydraulic Press brake machine can be with AC inverter motors or servo motors to control back gauge and bending depth / bending angle;
  • Back gauge is with Ball screw and liner guide; positioning and repeat accuracy is higher;
  • The NC Press Brake machine ram is down stroke type; two cylinders transfer bending force;
  • The bending beam / ram is with High wear-resistant polymer guide. It will make NC Hydraulic Press brake machine ram move smooth and accurate bending;
  • Two side cylinders are hydraulic-mechanic synchronized. Solid torsion bar will make NC Hydraulic Press brake machine bending under good parallelism and bending accurate;
  • Hydraulic cylinder has built-in mechanic stop. Two cylinders mechanic stops are synchronized by synchro-shaft and gear system. It will make cylinders work at same bending depth;
  • Our engineer designed NC Press brake machine open height, throat depth and cylinder stroke according to general sheet metal fabrication. Which is our standard machine parameters listed. We also can make according to customer special requirements;
  • At side of machine, remote hydraulic pressure gauge and adjust handle will make machine bending pressure adjust more easy.
  • Electric and hydraulic systems are with internal overload protection;
  • At side of NC Hydraulic Press brake machine, stroke adjustment structure will control ram top stop position, approaching to working speed change point. Ram working will have fast down, working, holding and return.
  • Hydraulic system is with low noise accurate gear pump, compact hydraulic valve block. Which will make machine easy hydraulic maintenance.100t-nc hydraulic press-brake machine detail
  • Movable foot switch with protection and emergency stop;
  • Welded back gauge beam has high rigidity and accuracy; we also can supply nice looking aluminum back gauge; two adjustable stop fingers;
  • Standard NC Hydraulic Press brake machine is with two front support arms; The arms are mounted in T-slot of working table, vertical-horizontal adjustable. The arms are with ruler and stopper for simple bending option;
  • Standard hydraulic punch and multi-V bottom die is equipped;
  • NC Press Brake machine Oil tank is with level and temperature indicator.
Item WC67K-100Ton×2500mm WC67K-100Ton×3200mm WC67K-100Ton×4000mm
Nominal force(KN) 1000 1,000 1000
Worktable length(mm) 2500 3200 4000
Distance between holes(mm) 2050 2650 3100
Depth of throat(mm) 320 320.0 320
Ram Stroke (mm) 100 100.0 100
Max open height(mm) 365 365.0 365
Ram Speed (mm/s) Fast Down 60 60.0 60
Working 8 8.0 8
Return 40 40.0 40
Volume of Oil Tank (L) 240L 280L 280L
Main power(Kw) 7.5 7.50 7.5
Weight(KGs) 6,000 7,500 7,500
Overall dimension(L×W×H mm) 2850×1900×2450 3500×1900×2450 4400×1900×2650