Hydraulic Swing Beam Shear Machine 6mm Sheet Cutting

conventional Hydraulic Swing Beam Shear 6sb

For plate shearing, Hydraulic Swing Beam Shear is a good selection. The cutting beam is welded structure, have high rigidity. Cutting angle is fixed. Electric and hydraulic system is easy for maintanence. Cutting accuracy is good for thin and thicker plate. Optional CNC controller is avialable. which will make machine positioning more accurate and easy. shearing blades gap can be adjusted according to plate thickness.the principle is 0.1*Thickness. shearing machine is with light for working area. cutting number can be counted by the controller.

ASK PRICE

TECHNICAL FEATURES

  • High quality plate welded structure will provide Hydraulic Swing Beam Shear machine with high rigidity and shearing accuracy;
  • Hydraulic Swing Beam Shear ‘s Triangle stable welded top shearing beam swing up down around self-aligning bearing;
  • NC control system can program on Hydraulic Swing Beam Shear back gauge;
  • Normal shear is with T screw. NC Hydraulic Swing Beam Shear Back gauge is equipped with high accuracy ball screw
  • Swing-up back gauge system for shearing longer pieces than maximum back gauge range
  • NC Hydraulic Swing Beam Shear Back gauge has retract function
  • The hydraulic system includes valve block, lower noise and high efficient gear pump, left/right hydraulic cylinders.
  • With shearing plate hydraulic hold down system;
  • Electric and hydraulic system overload protection;6mm hydraulic swing beam shear machine
  • Hydraulic Swing Beam Shear blades is made from special alloy material with proper heat treatment; two cutting edges one top blades; four cutting edges on down blades
  • Movable foot switch control plate shearing, with emergency stop
  • Front support arms are with ruller, T-slot and flip-stop
  • Working table of Hydraulic Swing Beam Shear is with ball or roller transfers;
  • Shadow line facility with fluorescent lighting
  • Hydraulic Swing Beam Shear has Front finger protection, rear protection fence and side throat guards;
Item QC12Y-6X2500 QC12Y-6X3200 QC12Y-6X4000 QC12Y-6X5000 QC12Y-6X6000
Max shearing thickness (mm) 6 6 6 6 6
Shearing length(mm) 2500 3200 4000 5000 6000
Plate material strength(Mpa) 450 450 450 450 450
Shearing Angle(degree) 1.5 1.5 1.5 1.5 1.5
Hold down cylinder number 13 14 18 22 25
Shearing times per min( /min) 18 14 12 7 7
Back gauge stroke (mm) 20-600 20-600 20-600 20-600 20-600
Volume of Oil Tank (L) 247 247 315 587 689
Main power(Kw) 7.5 7.5 11 11 15
Weight(KGs) 5,250 6,260 8,900 15,800 22,200
Overall dimension(L×W×H mm) 3140×1610×1630 3840×1610×1630 4660×1670×1830 5770×2150×2100 6800×2300×2360
  1. How to adjust Hydraulic Swing Beam Shear blades gap?

    To cut metal sheet , we shall set proper up / down blades gap. The proper shear blades gap will affect on cutting force and plate cutting edge. For low elongation metal plate, we shall use smaller gap.
    Hydraulic Swing Beam Shear Blade 

    GAP = K * t (plate thickness)

    • Mild steel (Q235, Q345): K = 0.1
    • Stainless steel (201, 304, 316):  K = 0.06~0.08
    • AL, copper : K = 0.6
    • Weldox (700, 900, 960): K = 0.12~0.16
    • Hardox (400 ): K = 0.16~0.18

    NOTE:  

    1. After first cutting, we shall check cutting edge performance. We may need to increase or decrease to improve edge performance.
    2. For Harder plate material, we shall use high chrome and harder shear blades, like Cr12MoV, H13;
    3. For harder material cutting, we shall use higher capacity shearing machine. The cutting force can be 2 times than mild steel for SS plate, Or even more for other harder plate. We shall keep blades edge sharp during cutting.
    4. For CNC Hydraulic Swing Beam Shear, we can directly adjust blades gap on CNC controller. while for manual metal plate shear, we can adjust blades gap by adjust handle manually.
  2. How to adjust Hydraulic Swing Beam Shear cutting angle / rake angle?
    • Only Hydraulic guillotine type Hydraulic Sheet Shearing Machine’s cutting angle is adjustable. For swing beam shear, top beam shearing angle is fixed.
    • Hydraulic guillotine shear’s cylinders are connected in series. It means big cylinder down chamber is connected with small cylinder’s top chamber by hydraulic pipe or hose.  Increase or decrease oil volume can adjust small cylinder’s relative position of small cylinder. so that we can adjust shearing angle.
    • On control panel, turn the key switch to angle, push increase or decrease button to adjust shearing angle.
    • For thin plate, smaller shearing angle can reduce edge twist. For bigger thickness plate, bigger shearing angle can reduce cutting force needed.
  3. How to Exchange Hydraulic Swing Beam Shear blades and how to sharp blades edge?
    • For Hydraulic guillotine shear, top/down blades has 4 cutting edge. for Hydraulic Swing Beam Shear, top blades have 2 cutting edge, bottom blades have 4 edge. we can directly take off blades and change cutting edge. Before use the machine, we shall make sure that the blades are fixed and gap even. otherwise, we may damage the blades.
    • When all blades edge is not blunt. We shall take off the blades complete (top / down). Put all same set blades over surface grinder to sharp them. we must make sure same set blades thickness is equal.
    • Shearing machine’s top blades are fixed by bolts only. bottom blades are fixed over square block. We must calibrate shearing gap before working. method is different for different model machine. consult our engineer for detail.