NC Hydraulic Press Brake 160T

160T NC hydraulic press brake

We can bend up to 6mm x 3m mild steel plate over WC67Y, NC Hydraulic Press Brake 160T machine. The machine structure had been examed by long history. High rigidity, long working life is good fame of the machine. Our most customers are steel structure company, who is using it on structure steel parts (Q345 grade). We have various bending length machine, 3.2, 4 or 6m. WC67Y-160T-6M is not suitable for big thickness sheet bending. Normally it is for metal roof, C or Z purlin parts bending. Compputer control system can be E21, with AC inverter motor or DA41 with servo motor.



  • The NC Hydraulic Press Brake machine is C-Frame type Press Brake. High quality plate welded structure; with vibration stress released will make machine high rigidity and long working life.
  • NC controller can be with AC inverter motors or servo motors to control back gauge and bending depth / bending angle;
  • Back gauge is with Ball screw and liner guide; positioning and repeat accuracy is higher;
  • The NC Hydraulic Press Brake machine ram is down stroke type; two cylinders transfer bending force;
  • The bending beam / ram is with High wear-resistant polymer guide. It will make ram move smooth and accurate bending;
  • Two side cylinders are hydraulic-mechanic synchronized. Solid torsion bar will make NC Hydraulic Press Brake machine bending under good parallelism and bending accurate;
  • Hydraulic cylinder has built-in mechanic stop. Two cylinders mechanic stops are synchronized by synchro-shaft and gear system. It will make cylinders work at same bending depth;
  • Our engineer designed NC Hydraulic Press Brake machine open height, throat depth and cylinder stroke according to general sheet metal fabrication. Which is our standard machine parameters listed. We also can make according to customer special requirements;
  • At side of NC Hydraulic Press Brake machine, remote hydraulic pressure gauge and adjust handle will make machine bending pressure adjust more easy.
  • Electric and hydraulic systems are with internal overload protection;
  • At side of NC Hydraulic Press Brake machine, stroke adjustment structure will control ram top stop position, approaching to working speed change point. Ram working will have fast down, working, holding and return.
  • Hydraulic system is with low noise accurate gear pump, compact hydraulic valve block. Which will make machine easy hydraulic maintenance.hydraulic NC press brake machine 160t
  • Movable foot switch with protection and emergency stop;
  • Welded back gauge beam has high rigidity and accuracy; we also can supply nice looking aluminum back gauge; two adjustable stop fingers;
  • Standard NC Hydraulic Press Brake machine is with two front support arms; The arms are mounted in T-slot of working table, vertical-horizontal adjustable. The arms are with ruler and stopper for simple bending option;
  • Standard hydraulic punch and multi-V bottom die is equipped;
  • NC Hydraulic Press Brake Oil tank is with level and temperature indicator.
Item WC67K-160Ton×3200mm WC67K-160Ton×4000mm
Nominal force(KN) 1600 1600
Worktable length(mm) 3200 4000
Distance between holes(mm) 2650 3100
Depth of throat(mm) 320 320
Ram Stroke (mm) 200 200
Max open height(mm) 480 480
Ram Speed (mm/s) Fast Down 60 60
Working 8 8
Return 50 50
Volume of Oil Tank (L) 280L 280L
Main power(Kw) 11 11
Weight(KGs) 9,500 10,500
Overall dimension(L×W×H mm) 3550×2100×2700 4400×2100×2700