Hydraulic Press Brake Machine 100T


  • First,  Hydraulic Press Brake Machine ram is down stroke type. Both cylinders transfer bending force from top.
  • The bending beam / ram is with High wear-resistant polymer guide. So that It will make Press Brake Machine ram move smoothly and bending accurately.
  • Two side cylinders are hydraulic-mechanic synchronized. It means that solid torsion bar will make bending under good parallelism and bending accurate;
  • Hydraulic cylinder has built-in mechanic stop. At same time, two cylinders mechanic stops are synchronized by synchro-shaft and gear system. So that it will make cylinders work at same bending depth;
  • Normally Our engineer designed Hydraulic Press Brake Machine’s open height, throat depth and cylinder stroke according to general sheet metal fabrication. Which is our standard machine parameters listed. For sure, We also can make according to customer special requirements;
  • At side of Press Brake Machine, normally with pressure gauge and remote valve. so it will make machine bending pressure adjust more easy.
  • Generally, both electric and hydraulic systems are with internal overload protection.
  • Normally, stroke adjustment structure will be installed at side of Hydraulic Press Brake Machine. Operator can easily control ram top stop position, approaching to working speed change point. so even as conventional bending machine, the ram will have correct procedure, like fast down, working, holding and return.
  • Because hydraulic system is with low noise accurate gear pump, compact hydraulic valve block. it will make Press Brake Machine easy maintenance.
  • Basically, Our machine is with high quality plate welded structure. Before welding, each plate will be with vibration stress released. so that machine is with high rigidity and long work life.
  • Movable foot switch with protection and emergency stop;
  • Welded back gauge beam has high rigidity and accuracy.  we also can supply nice looking aluminum back gauge; two adjustable stop fingers;
  • Standard Hydraulic Press Brake Machine is with two front support arms; The arms are mounted in T-slot of working table, vertical-horizontal adjustable. The arms are with ruler and stopper for simple bending option;
  • Standard punch and multi-V bottom die is equipped;
  • Hydraulic Press Brake Machine Oil tank is with level and temperature indicator.


Item WC67K-100Ton×2500mm WC67K-100Ton×3200mm WC67K-100Ton×4000mm
Nominal force(KN) 1000 1,000 1000
Worktable length(mm) 2500 3200 4000
Distance between holes(mm) 2050 2650 3100
Depth of throat(mm) 320 320.0 320
Ram Stroke (mm) 100 100.0 100
Max open height(mm) 365 365.0 365
Ram Speed (mm/s) Fast Down 60 60.0 60
Working 8 8.0 8
Return 40 40.0 40
Volume of Oil Tank (L) 240L 280L 280L
Main power(Kw) 7.5 7.50 7.5
Weight(KGs) 6,000 7,500 7,500
Overall dimension(L×W×H mm) 2850×1900×2450 3500×1900×2450 4400×1900×2650